流動式顆粒床過濾器之流動校正單元設計與分析研究; Flow-corrective elements of granular filter moving bed

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/2553

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/2553

题名:	流動式顆粒床過濾器之流動校正單元設計與分析研究;Flow-corrective elements of granular filter moving bed
作者:	高偉智;Wei-Zhi Gao
贡献者:	機械工程研究所
关键词:	顆粒床過濾器;滯流區;流動校正單元;granular bed filters;stagnant zones;internal i
日期:	2005-06-29
上传时间:	2009-09-21 11:50:12 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	顆粒床過濾器淨化高溫氣體一直存在著濾材滯流區形成，而造成系統堵塞之問題。我們已成功發展流動校正單元，將其嵌入顆粒床，可有效克服此問題，本研究將持續過去成果，繼續進行相關技術的開發工作與分析探討，並將重點列為發展不同型式之流動校正單元，探討其可行性與優劣點。本研究包含了過去研究的對稱型與垂直式流動校正單元的延續分析探討以及研發次葉片型流動校正單元的雙葉片系統。最終結果將提供為製作顆粒床過濾器之熱模系統，進行高溫測試。 Successful commercialization of advanced coal-based power generation technologies will require highly efficient removal of ash particles from gas streams at elevated temperatures and pressures. Particulate loading must be maintained at very low levels (e.g., smaller than 20 ppmw), and the concentration of large particles (greater than 5 μm) must be minimized to ensure the reliable operation of downstream combustion turbines in these environments. Previous studies have suggested that the ceramic and metallic candle filters can be used to meet these ambitious goals, but problems remain with the reliability of filter elements, failsafes, and sealing systems. For these reasons, alternative means of particulate removal, such as granular bed filters, especially moving bed filters continue to be developed. However, such equipment has hitherto met with problem of stagnant zones in moving bed. An internal insert can be used to prevent forming of stagnant zones and to widen the central flowing core of the filter moving bed. This paper presents the results of a study of the flow patterns in a 2-D cross-flow moving granular bed with three different systems of internal inserts in louvered wall granular moving bed. In experiments we chose 2-4 mm quartz sand as the granular media. The flow patterns of granular media in the systems with and without inserts were studied experimentally. The optimal placement of inserts was demonstrated to efficiently diminish the stagnant zones near the louvers.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....