Calculation of elastodynamic energy parameter for plane crack prior to kinking

NCU Institutional Repository > 工學院 > 土木工程研究所 > 期刊論文 > Item 987654321/26301

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26301

题名:	Calculation of elastodynamic energy parameter for plane crack prior to kinking
作者:	Chang,JH;Chen,CB
贡献者:	土木工程研究所
关键词:	RELEASE RATE;SOLIDS
日期:	1998
上传时间:	2010-06-29 17:10:17 (UTC+8)
出版者:	中央大學
摘要:	A numerical procedure, incorporated with the finite element solutions, is developed to evaluate the J(k)-integrals associated with crack kinking for a stationary crack in two-dimensional anisotropic elastic solids under dynamic loading conditions. In this paper, the formulation is shown analytically to be corresponding with the dynamic energy parameter and is clearly applied as a fracture criterion just before kinking takes place. The approach is verified to be path-independent in a modified sense. Special attention is also addressed to the simulation for the portions of integration around the near-tip region so that accurate solution is achieved without using any particular singular element. With the maximum energy release criterion, the predicted kink angle extracted from the transient numerical fields under steady loading condition is found to be inherently invariant, associated with each peak value of the energy parameter, and appears to be very close to that in the static case.
關聯:	JOURNAL OF ENGINEERING MECHANICS-ASCE
显示于类别:	[土木工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	438	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing