Effect of pre-immersion on the SCC of heat-treated AA7050 in an alkaline 3.5%NaCl

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 期刊論文 > Item 987654321/26380

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26380

题名:	Effect of pre-immersion on the SCC of heat-treated AA7050 in an alkaline 3.5%NaCl
作者:	Liao,HL;Lin,JC;Lee,SL
贡献者:	化學工程與材料工程學系
关键词:	STRESS-CORROSION CRACKING;ALUMINUM-ALLOYS;MG;AL;MECHANISMS;STRENGTH;STEEL
日期:	2009
上传时间:	2010-06-29 17:26:45 (UTC+8)
出版者:	中央大學
摘要:	AA7050 heat-treated variously was pre-immersed in an alkaline 3.5%NaCl for 240 h, and the pre-immersion effect on its SCC in the same environment was of interest. This effect was investigated using slow strain rate test and electrochemical techniques. For the specimens experienced a specific heat treatment, the pre-immersed one revealed higher SCC-resistance than that without pre-immersion. Analysis of the corrosion products benefited to delineate the enhancement in SCC-resistance. The corrosion product on T6 was enriched with CuO. The presence of copper oxide in the corrosion product results in a better resistance to SCC for T6 than other specimens. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.
關聯:	CORROSION SCIENCE
显示于类别:	[化學工程與材料工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	922	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing