進年來數位影像產品的需求快速成長，帶動光學低通濾波片的需求，該產品工序複雜，須相當多人工製作,本研究以多片式貼合後段的製程，針對製程設計設備並作研究實驗，改良設備，減少人工所產生的不良及增加生產效率。 在本研究中設計設備有自動點膠機及UV照射固化設備,在實務生產過程中瞭解製程需求，並設計符合生產需求的設備，結合外包廠商製造設備能力並給與合宜的建議，製造雛形機，利用實驗方式作出最佳化的製程參數及設備需改良的部份，完成此階段即作量產專用機，從小量試產到大量生產，其目地為降低人工成本增加產能，達成自動化初期目標。 Summary These years, because of the high growth speed of digital products, the demand of OLPF filter is effect to increase very fast. This product is very difficult to manufacture that need many manpower to complete. This investigation focuses multi-quartz glued at the last production course, is to find a method to improve the manufacturing device, increase the efficiency and, decreasing the defect rate from man-made process. In this research, the design equipment has the automatic the gum machine and UV curing equipment. Understand a production process need in the actual situation production line; and design the equipment that is fit for production process. In terms of the ability of OEM production devices and useful advises, making embryo machine. Make use of experimental methods, get the best manufacturing process parameter, and make an equipments part that need to be improved to get an improvement, after this stage, then be quantity production machine. From small quantity trial-product to large numbers product, the aim is reducing man-made cost, raising the production capacity and accomplishing preliminary automation.