Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 期刊論文 > Item 987654321/26483

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26483

题名:	Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering
作者:	Ho,CE;Chen,YM;Kao,CR
贡献者:	化學工程與材料工程學系
关键词:	AU FOILS;SN
日期:	1999
上传时间:	2010-06-29 17:29:06 (UTC+8)
出版者:	中央大學
摘要:	The Au/Ni/Cu three-layer structure is one of the most common solder-bah pad finishes for the ball-grid-array (BGA) packages. The first layer, which is to be in direct contact with the solder, is a 1-mu m Au layer. Beneath the Au layer is the Ni layer, whose thickness is about 7 mu m. The Cu layer is part of the internal wiring of a EGA package. In this study, eutectic PbSn solder-balls were reflowed on the Au/Ni/Cu pads at 225 degrees C for reflow times from 7.5 s to 1003 s. It was found that the Au layer reacted very quickly with the solder to form AuSn4 and AuSn2. The growth rate of AuSn4 + AuSn2 was very high, approaching 1 mu m/s. When the reflow time reached 10 s, all the Au had been consumed, and AuSn2 had been converted to AuSn4. Moreover, AuSn4 grains began to separate themselves from the Ni layer at the roots of the grains, and started to fall into the solder. When the reflow time reached 30 s, all AuSn4 grains had left the interface and a thin layer of Ni3Sn4 formed at the solder-Ni interface. The growth rate of this Ni3Sn4 layer was very low, reaching only 6 mu m for 1003 s of reflow. This study showed that during reflow the Au layer reacted with Sn to form AuSn4 first, and then broke off and fell into the molten solder. In other words, the Au layer did not dissolve into the molten solder directly during reflow.
關聯:	JOURNAL OF ELECTRONIC MATERIALS
显示于类别:	[化學工程與材料工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	497	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....