Impact of various ball cutter tool positions on the surface integrity of low carbon steel

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26866

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26866

题名:	Impact of various ball cutter tool positions on the surface integrity of low carbon steel
作者:	Kalvoda,T;Hwang,YR
贡献者:	機械工程研究所
关键词:	SPEED;ANGLE
日期:	2009
上传时间:	2010-06-29 18:02:02 (UTC+8)
出版者:	中央大學
摘要:	In this study, we report on the impact of different cutter tool positions on the surface integrity (residual stresses, micro-hardness, roughness and texture) of low carbon steel. The effects of different tool positions of the ball end cutter tool during 5-axis machining were studied and differences in the slope of the tilt and lead angle compared. The effects of the depth of the cut and coolant on the surface integrity were also studied. The results of the experiments should lead to a better understanding of the effect of the ball end cutter tool position on the surface integrity if low carbon steel during the 5-axis machining process. The study is designed to show the effect of different tool positions only, while the other parameters (e.g., cutting speed, feed rate, cutter tool slope) remain constant. The results show that the tilt angel has a larger impact on the surface integrity (both residual stress and roughness) compared to the lead angle. (C) 2009 Elsevier Ltd. All rights reserved.
關聯:	MATERIALS & DESIGN
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	364	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing