Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26880

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26880

题名:	Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis
作者:	Tzeng,CJ;Lin,YH;Yang,YK;Jeng,MC
贡献者:	機械工程研究所
关键词:	CUTTING PARAMETERS;SURFACE-ROUGHNESS;DESIGN OPTIMIZATION
日期:	2009
上传时间:	2010-06-29 18:02:21 (UTC+8)
出版者:	中央大學
摘要:	This study investigated the optimization of CNC turning operation parameters for SKD11 (JIS) using the Grey relational analysis method. Nine experimental runs based on an orthogonal array of Taguchi method were performed. The surface properties of roughness average and roughness maximum as well as the roundness were selected as the quality targets. An optimal parameter combination of the turning operation was obtained via Grey relational analysis. By analyzing the Grey relational grade matrix, the degree of influence for each controllable process factor onto individual quality targets can be found. The depth of cut was identified to be the most influence on the roughness average and the cutting speed is the most influential factor to the roughness maximum and the roundness. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor; the depth of cut is the most significant controlled factors for the turning operations according to the weighted sum grade of the roughness average, roughness maximum and roundness. (c) 2008 Elsevier B.V. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	535	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....