Performance comparison of rectangular and air-foil shapes offset strip flow paths micro-heat exchangers

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26883

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26883

题名:	Performance comparison of rectangular and air-foil shapes offset strip flow paths micro-heat exchangers
作者:	Yeh,CT;Yang,CY
贡献者:	機械工程研究所
关键词:	FLUX
日期:	2009
上传时间:	2010-06-29 18:02:25 (UTC+8)
出版者:	中央大學
摘要:	This study designed and tested eight micro-heat exchangers with rectangle-, air-foil-, and shuttle-type strips for use in the liquid cooling system. The effects of strip length, strip type, and strip arrangement were considered for heat transfer performance comparison. The test results show that the heat exchangers with shorter strip length and narrower strip space provide better heat transfer performance. The short air-foil strips heat exchanger with 1.0 mm strip length performed the lowest thermal resistance among all types of heat exchangers. Because of its narrow flow paths, the performance of the overlapped shuttle strip heat exchanger is better than that of the offset shuttle, long air-foil, and rectangle strip heat exchangers. However, the space between strips is limited by the fabrication techniques and is difficult to be made narrower by the method of chemical etching.
關聯:	HEAT TRANSFER ENGINEERING
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	493	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing