A general modeling for heat transfer during reflux condensation inside vertical tubes surrounded by isothermal fluid

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26905

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26905

题名:	A general modeling for heat transfer during reflux condensation inside vertical tubes surrounded by isothermal fluid
作者:	Chou,GH;Chen,JC
贡献者:	機械工程研究所
关键词:	2-PHASE CLOSED THERMOSYPHON
日期:	1999
上传时间:	2010-06-29 18:02:56 (UTC+8)
出版者:	中央大學
摘要:	An analytical modeling of condensation heat transfer characteristics under reflux cooling mode inside vertical tubes surrounded by isothermal external fluid was conducted in the present work. The dimensionless film thickness, film Reynolds number as well as the heat transfer coefficient in the condensate film were formulated and calculated numerically. The results indicate that the increase in Blot number thickens the film layer, speeds the film Reynolds number, and increases the condensation heat transfer coefficient. As Bi much greater than 1 and (N) over cap u = 1, the limiting cases for both isothermal wall and uniform wall heat flux, respectively, were derived for comparison. As compared with the experimental data of reflux condensation from previous studies, the analytical results show good agreement with the observed trend of the condensation heat transfer. (C) 1999 Elsevier Science Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	585	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing