Effects of SiCp reinforcement by electroless copper plating on properties of Cu/SiCp composites

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26916

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26916

题名:	Effects of SiCp reinforcement by electroless copper plating on properties of Cu/SiCp composites
作者:	Lee,YF;Lee,SL;Chuang,CL;Lin,JC
贡献者:	機械工程研究所
关键词:	METAL-MATRIX COMPOSITES;CORROSION BEHAVIOR;FABRICATION;ALUMINUM
日期:	1999
上传时间:	2010-06-29 18:03:12 (UTC+8)
出版者:	中央大學
摘要:	Silicon carbide reinforced copper matrix composites containing 50-80 vol.-%SiCp were fabricated by hot pressing copper coated SIG, powder. The results show that the densification, thermal expansion coefficients, flexural strength, and thermal conductivity of Cu/SiCp composites reinforced by electroless copper plating and their corrosion resistance in 5%NaCl solution are better than those without electroless plating. Physical properties and flexural strength of the composites decrease with an increase in SIG, content, whereas the corrosion resistance increases with an increase in SiCp volume fraction. By observing the Fracture surface after a flexural test, it can be seen there are two types of fracture model: the cracking of Cu/SiCp interface and the pulling out of SiCp particles. The experiment also proved that the bonding strength of the Cu/SiCp interface and the pressure of the hot pressing operation are the two main factors which influence the fracture of these composites.
關聯:	POWDER METALLURGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	489	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing