Micro slit machining using electro-discharge machining with a modified rotary disk electrode (RDE)

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26929

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26929

題名:	Micro slit machining using electro-discharge machining with a modified rotary disk electrode (RDE)
作者:	Chow,HM;Yan,BH;Huang,FY
貢獻者:	機械工程研究所
關鍵詞:	TITANIUM
日期:	1999
上傳時間:	2010-06-29 18:03:30 (UTC+8)
出版者:	中央大學
摘要:	To circumvent the high cost of micro electro-discharge machining (MEDM) with superfine wire, the authors modified a conventional electro-discharge machine (EDM) by fitting a rotating disk as the electrode (RDE). Locating the electrode below the workpiece in the modified RDE-EDM, the debris removal rate was greatly improved. Further, by an improved fixture design to stabilize electrode vibration during machining and by a revised circuit designation to reduce the discharge current, micro slit machining was made feasible in practical application. A 42 mu m-wide micro slit with a depth of 1.02 mm was fabricated successfully on a Ti-6Al-4V workpiece by using 25 mu m thickness copper as the material of the rotating disk electrode and kerosene as the dielectric fluid. The effects of polarity, discharge current, pulse duration and rotational speed on the material removal rate (MRR), the electrode wear rate (EWR), the expansion of slit, the surface profile and the recast layer of micro slit machining are reported and discussed. (C) 1999 Elsevier Science S.A. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	527	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing