Dynamic reliability behavior for sliding wear of carburized steel

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26991

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26991

题名:	Dynamic reliability behavior for sliding wear of carburized steel
作者:	Wang,KS;Chen,CS;Huang,JJ
贡献者:	機械工程學系
关键词:	DELAMINATION
日期:	1997
上传时间:	2010-06-29 18:05:00 (UTC+8)
出版者:	中央大學
摘要:	In this paper two types of the dynamic reliability model are proposed and compared with the Weibull distribution of sliding wear. These models are concerned with the relationship between the hazard function and the dynamic reliability. One considers a differential equation form, called the DE model, the other takes an algebraic dependence, AE model. The physical problem used in the simulation deals with the sliding of multiple ring-disk system. The disk is carburized, and the ring is assumed to be much harder than the disk. The dynamic reliability and failure rate variation of the disk can be estimated by the critical wear depth during sliding. The results show that the predictions followed DE model and Weibull distribution are a little conservative. Some physical interpretations of the models are presented. Both models are recommended due to their acceptable RMS error, physical meaning and simple appearance. (C) 1997 Elsevier Science Limited.
關聯:	RELIABILITY ENGINEERING & SYSTEM SAFETY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	437	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing