Interference-free cutting-path generation based on scanning data

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26998

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26998

题名:	Interference-free cutting-path generation based on scanning data
作者:	Lin,CY;Hwang,YY;Lai,JY
贡献者:	機械工程研究所
关键词:	SCULPTURED SURFACES;STRATEGY;SYSTEM
日期:	1997
上传时间:	2010-06-29 18:05:10 (UTC+8)
出版者:	中央大學
摘要:	This work presents a novel cutting-path planning strategy for three-axis machining of 3D scanning data. A curve-fitting algorithm is employed to fit each array of the measured data into parallel sectional curves, ensuring that the effect of measurement and form errors call be substantially reduced. The best-fitting sectional curves are then used to construct a surface of triangular meshes. A modified chord-length method is also proposed to adequately control the accuracy of the triangular meshes generated. The triangular meshes are then offset along the surface normal to obtain an offset mesh surface on which the cutting paths are planned. An effective gouging detection and removal algorithm are also proposed to prevent the machined surface from overcutting. Several computer simulation results demonstrate the feasibility of the proposed strategy.
關聯:	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	466	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing