Effect of surface properties of silver powder on the sintering of its thick-film conductor

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27032

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27032

题名:	Effect of surface properties of silver powder on the sintering of its thick-film conductor
作者:	Lin,JC;Wang,CY
贡献者:	機械工程學系
关键词:	COMPACTION;TIO2
日期:	1996
上传时间:	2010-06-29 18:06:02 (UTC+8)
出版者:	中央大學
摘要:	The effect of the surface properties of silver powder on the sintering of its thick film has been investigated in this study. The variations in the sintering structure have been observed to depend upon the kind of surfactant treatment of the powders and their surface area (SA). Silver powders treated with both caprylic acid and triethanolamine show a better densification in both dried prints as well as fired films as compared with those treated with single surfactant or none. For the powders treated with both surfactants, the surface area primarily determines the densification of fired films. Powders with SA greater than 7 X 10(3) m(2) kg(-1) have thus been observed to be appropriate for thick-film applications, even at firing temperatures (450 degrees C) considerably lower than usual (800 degrees C). Structural evolution during firing has been studied by inspecting the morphology (as shown by scanning electron microscope) and sheet resistivity of the films.
關聯:	MATERIALS CHEMISTRY AND PHYSICS
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	538	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing