Influence of microstructure on the fatigue properties of austempered ductile irons .2. Low-cycle fatigue

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27043

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27043

题名:	Influence of microstructure on the fatigue properties of austempered ductile irons .2. Low-cycle fatigue
作者:	Lin,CK;Hung,TP
贡献者:	機械工程學系
关键词:	N/A
日期:	1996
上传时间:	2010-06-29 18:06:18 (UTC+8)
出版者:	中央大學
摘要:	The low-cycle fatigue (LCF) properties of a number of different grades of austempered ductile irons (ADIs) were investigated. Four different base-irons were prepared with varying nodularity, nodule count, and alloy elements. Each base-iron was austenitized at 900 degrees C and then austempered at 300 and similar to 360 degrees C, respectively. Uniaxial LCF tests were conducted under strain-control at several strain amplitudes in tension-compression cyclic loading. No simple rule existed between LCF strength and monotonic tensile strength or toughness for the given ADIs as it depended on the nodule count of spheroidal graphite. The effects of austempering temperatures, nodularity, nodule count, and morphology of retained austenite in the matrix of ADI on the LCF behavior are discussed. Fractography with scanning electron microscopy was used to determine the LCF failure mechanisms and fatigue crack propagation modes. Copyright (C) 1996 Elsevier Science Limited
關聯:	INTERNATIONAL JOURNAL OF FATIGUE
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	470	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing