SUPERPLASTIC FORMING OF AN AL-LI-CU-MG-ZR ALLOY USING VARIOUS FORMING PATHS

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/27083

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/27083

Title:	SUPERPLASTIC FORMING OF AN AL-LI-CU-MG-ZR ALLOY USING VARIOUS FORMING PATHS
Authors:	WU,HY;CHERN,JT;LEE,S
Contributors:	機械工程研究所
Keywords:	ENHANCED GRAIN-GROWTH;DEFORMATION
Date:	1995
Issue Date:	2010-06-29 18:07:18 (UTC+8)
Publisher:	中央大學
Abstract:	A series of experiments were performed by use of various forming paths during superplastic forming of an el-Li based alloy. A fully recrystallized Al-Li-Cu-Mg-Zr alloy could be formed superplastically using paths of either a constant or a variable strain rate. The distribution of thickness along-the formed sheet was confirmed by the results as being not much sensitive to the forming paths. The uniformity of the formed part affected the microstructural characteristics; the grain size was larger in regions at which the plastic deformation was larger, an effect was believed due to strain-induced grain growth. Static growth of grain showed little effect on an Al-Li based alloy during superplastic forming. The strain-induced grain growth influenced the distribution of grain size, resulting in cavitation occurring in the regions of large grain size. A two-step variable forming path could reduce cavitation in the formed part.
Relation:	MATERIALS AND MANUFACTURING PROCESSES
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	447	View/Open

社群 sharing