A STRATEGY FOR FINISH CUTTING PATH GENERATION OF COMPOUND SURFACES

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27089

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27089

题名:	A STRATEGY FOR FINISH CUTTING PATH GENERATION OF COMPOUND SURFACES
作者:	LAI,JY;WANG,DJ
贡献者:	機械工程學系
关键词:	NC
日期:	1994
上传时间:	2010-06-29 18:07:27 (UTC+8)
出版者:	中央大學
摘要:	The Cartesian machining method has been used extensively for cutting path generation of compound surfaces on NC machine tools. Most of the available algorithms, however, are based on the so called CC-Cartesian method, in which the cutter contact points are generated first. Each array of points is then offset along the surface normal to obtain a sequence of cutter location points on which a cutting path is generated. The problem of such a method, however, is that the detection and elimination of gouging is difficult as the sequences of cutter location points may not locate on a plane. An alternative approach is proposed in this work by offsetting the part surface first and then generating the cutting paths on the offset surface. A prototype system capable of modeling compound surfaces composed of analytical CSG primitives and parametric NURB surfaces is developed. Each of the surface elements is offset individually. The cutter center points are then determined directly from the offset surfaces rather than the cutter contact points. All cutting paths are definitely parallel to each other and, hence, the gouging problem can be dealt with easily. To enhance the computational efficiency, the NURB surface element is approximated by triangular meshes so that the offsetting procedures can be carried out. Several examples are presented to verify the feasibility of the proposed strategy.
關聯:	COMPUTERS IN INDUSTRY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	382	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....