SURFACE HARDENING OF AISI-4340 STEEL BY ELECTRON-BEAM TREATMENT

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/27103

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/27103

Title:	SURFACE HARDENING OF AISI-4340 STEEL BY ELECTRON-BEAM TREATMENT
Authors:	WANG,CC;HWANG,JR
Contributors:	機械工程研究所
Keywords:	N/A
Date:	1994
Issue Date:	2010-06-29 18:07:49 (UTC+8)
Publisher:	中央大學
Abstract:	This paper investigates the effect of electron beam (EB) surface hardening on the abrasive wear property of AISI 4340 steel. The heat treatment conditions were varied so that the influence of microstructures on the wear resistance could be evaluated. A dry sand/rubber wheel abrasion test was selected to evaluate the high stress wear properties. The results show that the weight loss decreases with increasing hardness of surface layer or base material. The EB surface hardening can improve the abrasive wear resistance by about 10%. The best heat treatment process for AISI 4340 steel against abrasive wear is oil quenching from 840-degrees-C, tempering at 370-degrees-C, then EB surface hardening under heat input of 135-150 J mm-1. The width and depth of the wear tracks are reduced after the EB surface hardening treatment.
Relation:	SURFACE & COATINGS TECHNOLOGY
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	416	View/Open

社群 sharing