ADAPTIVE FLOW-RATE CONTROL OF A HYDRAULIC PROPORTIONAL VALVE

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27132

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27132

题名:	ADAPTIVE FLOW-RATE CONTROL OF A HYDRAULIC PROPORTIONAL VALVE
作者:	LAI,JY;CHEN,YR
贡献者:	機械工程學系
关键词:	TIME-DELAY;SYSTEMS
日期:	1992
上传时间:	2010-06-29 18:08:34 (UTC+8)
出版者:	中央大學
摘要:	The use of hydraulic proportional valves in industry is becoming increasingly popular as they have better performance than conventional on-off valves and lower cost than servovalves. However, due to significant time delay in valve dynamics, they are currently used for low-accuracy and low-dynamics applications. In this study, an adaptive self-tuning controller is proposed to enable a hydraulic proportional valve to achieve accurate set-point flow rate control. A moving model which reduces the system order and hence reduces the identification effort was used for the controller design. The controller is based on the pole-placement technique which shifts the dominant pole to the desired location. In addition, a predictor has been proposed to overcome the effect of the time delay. Experimental results have shown that the proposed self-tuning controller is better than the conventional PI controller as both transient oscillation and steady-state error shown in the PI control have been significantly reduced. Also, the performance of the closed-loop system is very robust as the system response remains the same under various operating conditions.
關聯:	JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	494	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....