WEAR BEHAVIOR AND MICROSTRUCTURE OF LASER-PROCESSED LOW-CARBON STEEL WITH CHROMIUM

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27159

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27159

题名:	WEAR BEHAVIOR AND MICROSTRUCTURE OF LASER-PROCESSED LOW-CARBON STEEL WITH CHROMIUM
作者:	TAN,YH;DOONG,JL
贡献者:	機械工程學系
关键词:	ABRASIVE WEAR;RESISTANCE
日期:	1991
上传时间:	2010-06-29 18:09:15 (UTC+8)
出版者:	中央大學
摘要:	A 2.5 kW CO2 continuous wave laser has been used to modify the surface microstructure of low carbon steel with chromium. The laser-induced surface microstructure has been studied as a function of processing parameters such as power density, laser beam-substrate interaction time and energy density (product of power density and beam-substrate interaction time). The effects of surface roughness, alloyed layers with various depths and hardness distribution on the abrasive wear properties were studied. Microstructural analysis performed by transmission electron microscopy, optical microscopy and X-ray diffraction of the alloyed layers showed two types of structure depending on composition and energy density. A block-on-ring test system was employed to evaluate the wear properties of the laser-surface-alloyed layers. The wear surface was examined with a scanning electron microscope. It was found that the laser radiation and rapid solidification changed the microstructure of the surface layers, resulting in an increase of surface hardness and resistance to abrasive wear compared with the bulk material. High energy density processing produced a martensite-ferrite mixture and some retained austenite structure exhibiting higher hardness than the austenite-ferrite structure produced by low energy density processing. The wear resistance increases with decreasing surface roughness and increasing surface hardness. The wear mechanism consists of the formation of grooves (ploughing by the abrasive particle) and the removal of chips during the repeated passes. The higher hardness permits shallow wear grooves in the worn surface.
關聯:	WEAR
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	459	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....