IMPACT PROPERTIES OF A LAMINATED COMPOSITE BASED ON ULTRAHIGH CARBON-STEEL AND HADFIELD MANGANESE STEEL

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/27167

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/27167

Title:	IMPACT PROPERTIES OF A LAMINATED COMPOSITE BASED ON ULTRAHIGH CARBON-STEEL AND HADFIELD MANGANESE STEEL
Authors:	LEE,SO;WADSWORTH,J;SHERBY,OD
Contributors:	機械工程學系
Keywords:	N/A
Date:	1990
Issue Date:	2010-06-29 18:09:28 (UTC+8)
Publisher:	中央大學
Abstract:	The V-notch impact properties of a laminated composite based on ultrahigh carbon steel (UHCS) and Hadfield manganese steel (HMS) were investigated in the temperature range - 196 to 25-degrees-C. The impact properties were evaluated after heat treatment above the A1 transformation temperature of the ultrahigh carbon steel. The laminated composite exhibits a DBTT of - 100-degrees-C which is lower than either of the monolithic steels that make up the laminate. This is a result of notch blunting from two sources; one source is delamination at the laminate interfaces, and the other source is plastic flow in the HMS matrix. A selectively heat treated laminated composite with very hard UHCS layers (R(c) = 66) and soft HMS layers (R(c) = 17) exhibits a good notch impact toughness of 51J at room temperature. This is attributed to crack blunting by the tough HMS layers and to cracking of the UHCS layers during impact.
Relation:	RES MECHANICA
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	439	View/Open

社群 sharing