English  |  正體中文  |  简体中文  |  Items with full text/Total items : 75533/75533 (100%)
Visitors : 27403997      Online Users : 395
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/2750

    Title: 剪力流中分離現象研究
    Authors: 黃俊豪;Chung-Hao Huang
    Contributors: 機械工程研究所
    Date: 2006-07-07
    Issue Date: 2009-09-21 11:54:44 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 本文觀察經剪力作用之混合大小粒子並探討其分離現象,普遍認 為由粒徑差異所造成的分離現象主要由滲透效應來主導,所謂的滲透 效應即小粒子藉由外來能量而穿透大粒子間隙的一種遷移現象。 本文使用實驗方法,針對底盤速度與粒子佔有體積比對粒子在剪 力槽內分離現象所造成影響做探討。藉由觀察剪力槽內分離現象隨時 間變化情形,分析小粒子之速度分布以及粒子溫度、濃度分佈、分離 強度等,實驗發現底盤速度與粒子佔有體積比提高,粒子之平均速度 梯度、x 方向與y 方向擾動速度梯度以及粒子溫度梯度皆會增加,且 高底盤速度與高粒子佔有體積亦具有較大初始分離速率與穩定狀態 時較高之分離強度值,其中粒子佔有體積比對初始分離率與最大分離 強度具有較大的影響力。另外亦針對粒徑比,利用剪力槽上壁面所裝 置三個雙向應力規來量測剪應力與正向應力,分析作用於剪力槽邊壁 之應力大小。 This thesis examines the segregation phenomena of binary granular material subjected to external sheared force. This type of flow in a shear cell is known as Couette flow in fluid mechanics. The influence of both the bottom wall velocity and solid fraction of granular material on the segregation behaviors are discussed.Experiments are performed in a shear cell device and the glass spheres are used as granular materials. The motions of the granular materials are recorded by a high-speed camera. Image processing technology and particle tracking method are employed to measure the average and fluctuation velocities in the streamwise and the transverse directions. Two models are used to describe segregation level and an index called intensity of segregation, Is, is employed to quantify the segregation quality. The initial segregation rate is calculated from a least-square fit using the time evolution of Is. Three bi-directional stress gages are installed on the upper wall to measure the nomal and shear stresses.
    Appears in Collections:[機械工程研究所] 博碩士論文

    Files in This Item:

    File SizeFormat

    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明