中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/28217
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78818/78818 (100%)
造訪人次 : 34996531      線上人數 : 462
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/28217


    題名: On the preparation of high reflectance aspherical mirrors by thin-film deposition
    作者: Jaing,CC;Lee,CC
    貢獻者: 光電科學研究所
    日期: 1996
    上傳時間: 2010-06-29 19:44:10 (UTC+8)
    出版者: 中央大學
    摘要: One of the problems of making aspherical mirrors by thin-film deposition of aluminium is the low reflectance of the films. Such a low reflectance of the films is due to the fact that the aluminum film is too thick and makes the surface rough, resulting in scattering of light [1-5]. Another problem is that the reflectance of an aspherical mirror is not the same at different zones, because the thickness distribution of an aluminium film is not uniform. For example, for a desired paraboloid with a vertex radius, R, and a starting spherical substrate with a curvature radius, R', and a maximum radius, S-0, the required film thickness distribution, D(S), is S-2(S-0(2)-S-2)/8R'(3), where S is the radius [5]. The relationship between R and R' is R = (4R'(3))/(4R'(2) + S-0(2)). Differentiating D with respect to S, we then find that the largest film thickness is S-0(4)/32R'(3) at S = (1/2)S-1/2(0). Assuming that R = 500 mm and S-0 = 50 mm, the thickness of the film is 1.661 mu m, which is too thick to have such high reflectance as a thin aluminium film does. To deposit thick films and still maintain good optical quality is state of the art. Dobrowolski and Weinstein used zinc sulfide to make aspherical lenses that exhibited no peeling or cracking [3, 4]. A zinc sulfide-thorium fluoride mixture evaporation source was suggested to make aspherical mirrors by Kurdock and Austin [6]. In this paper we show the results obtained when an Al2O3 layer is deposited to form an aspherical surface, followed by deposition of a thin layer of aluminium.
    關聯: OPTICAL AND QUANTUM ELECTRONICS
    顯示於類別:[光電科學研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML520檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明