以數位信號處理器為基礎之直流無刷馬達驅動系統; DSP-Based Brushless DC Motor Drive System

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/2888

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/2888

题名:	以數位信號處理器為基礎之直流無刷馬達驅動系統;DSP-Based Brushless DC Motor Drive System
作者:	陳冠仁;Kuan-Jen Chen
贡献者:	機械工程研究所
关键词:	數位信號處理器;直流無刷馬達;磁滯電流控制;Brushless DC Motor;DSP;Hysteresis Current Control
日期:	2007-07-03
上传时间:	2009-09-21 11:59:24 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	本論文針對直流無刷馬達研製驅動系統，並以磁滯型電流控制為主。磁滯型電流控制的響應速度快，並且具有一定的精密度，其硬體架構並不複雜。在馬達的速度上則以PI控制器完成馬達之速度控制。本論文首先簡要說明有刷馬達及交流電動機的架構及差異，再介紹直流無刷馬達之構造、數學方程式以及換相原理。直流無刷馬換相簡單、具有高轉矩和高效率等良好特性。另外，由於缺少整流子及碳刷等構造，因此可以高速運轉並且不需要維修。本文提出的數位化直流無刷馬達驅動系統，主要為數位信號處理器(TMS320F2812)以及智慧型功率晶體驅動模組之整合。數位信號處理器為電流控制及速度控制之核心，其運算速度快，且周邊功能強大。數位信號處理器可將抓取之電流訊號做12-bit解析度之類比/數位轉換，亦可讀取轉軸編碼器並計算位置及速度。最後實驗結果驗證所提出之控制法則的可行性與正確性。 The thesis discusses the driving system of Brushless DC Motor (BDCM), and the current control was achieved by means of hysteresis control. Hysteresis current control gives fast response and good accuracy. It can be implemented with a simple hardware. The speed control of BDCM was achieved with a PI controller. A brief introduction of the difference between the brush DC motor and the Brushless AC Motor in the first, then the characteristics and mathematical model of the BDCM are introduced. The principle of commutation is also presented. The main advantages of the BDCM include simple commutation, high torque to current ratio and high power factor. In addition, the absence of commutators and brushes lead to very high speed capability and not to maintain. The driving system of BDCM is composed of a digital signal processor (DSP TMS320F2812) and an intelligent power module. The digital signal processor is the kernel of the current control and the speed control. The DSP have high performance, and the functions of peripherals are powerful. It also gets the current feedback signal from the current sensors through analogy-to- digital converter, and gets position signal from the encoder. Experimental results prove that the strategy of control is feasibility and accuracy.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....