中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/2898
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 41749685      在线人数 : 1787
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/2898


    题名: 共振頻率法於牙根植體缺損位置判別研究;THE BONY DEFECTED LOCATION on DENTAL IMPLANTS by THE FREQUENCY RESPONSE METHOD
    作者: 陳梓尉;Zih-Wei Chen
    贡献者: 機械工程研究所
    关键词: 骨缺損;共振頻率法;實驗模態測試;牙科植體;Finite Element Analysis;Experimental Modal Analysis;Resonant Frequency Response Method;Bone defect;Dental Implant
    日期: 2007-07-07
    上传时间: 2009-09-21 11:59:45 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 植牙術後的骨整合程度,關係到手術是否成功。本文以加速規貼在牙科植體表面上作為感測器,配合衝擊鎚激振作為驅動器進行懸臂樑之實驗模態測試;並搭配有限元素法做模態分析,觀察結構共振頻率與骨缺損之關係,以建立一套檢測機制。首先,由理論分析獲得植體尺寸與共振頻率關係,再由實驗驗證骨缺損模型為近似懸臂樑結構;搭配有限元素做數值模態分析,得其共振頻率與振型。另在實驗方面,藉衝擊鎚做不同模型之間的敲擊,可從加速規獲得結構共振頻率,和有限元素分析結果比較其差異,並將不同缺損狀態結構共振頻率值做分析整理,可建立一套檢測機制。共有五個步驟,包括方位判別、完全缺損判斷、垂直剖面下之缺損位置與缺損量判斷、整體缺損量判斷、綜合研判等。研究中,並將此檢測方法應用於第三類模型上進行測試,以驗證檢測技術之有效性。 This study is based on the resonant frequency response to specify criteria for examining the defect severity in the bone of dental implant. Both the finite element analysis and the experimental modal analysis are applied to compare the differences between experiment and simulation. By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. Furthermore, the study applied the given formula to generalize a relation between resonant frequency response and model size. In this article, three modals were designed to test and verify whether the resonant frequency response is related to model defected depth. Then, we collated those data and defined a criterion to detect the defect bone depth with dental implant. The five detection steps include to defect the horizontal positions, to detect the entire defect, to detect the defect depth and quantity in vertical section, to detect the whole defect, and to analyze etc. In the end, we applied the method in the third model to verify its effectiveness.
    显示于类别:[機械工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明