間氯酚與對氯酚之固液相平衡研究; Research of Solid-Liquid Equilibrium of 3-chlorophenol and 4-chlorophenol

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 博碩士論文 > Item 987654321/3693

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/3693

题名:	間氯酚與對氯酚之固液相平衡研究;Research of Solid-Liquid Equilibrium of 3-chlorophenol and 4-chlorophenol
作者:	許世杰;Shih-Chieh Hsu
贡献者:	化學工程與材料工程研究所
关键词:	締合結晶法;結晶;固液平衡;分離流程;adductive agent;separation process;SLE;crystallization;adductive crystallization
日期:	2002-07-01
上传时间:	2009-09-21 12:20:18 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	摘要工業上常需分離混合物以得到更高純度的產物，可行的方法有很多，本論文乃是研究以締合結晶法來分離沸點相近的間氯酚及對氯酚混合物。在此分別嘗試以苯胺及特丁醇為中和劑，探討中和劑之合適性。經雙成份之固液相圖研究發現，苯胺與對氯酚及間氯酚生成1：1之複合物；特丁醇則與對氯酚及間氯酚生成2：1之複合物，故兩者均為頗合適的中和劑。我們進一步探討對氯酚、間氯酚與苯胺以及對氯酚、間氯酚與特丁醇兩組三成份之固液相行為，並繪製出三成份固液相圖，利用相圖所提供之資料，我們嘗試找出可行的分離流程，並依不同入料成份加以探討。本研究中相圖之建立乃是利用固體消失法，經由在恒溫槽中，觀察各不同成份組成之樣品的最後固體消失溫度而來。而數據關聯部份，採用了物理化學模式，以計算活性係數；於無合熔點之系統，以共熔點為分界點，以Wilson模式及NRTL模式計算活性係數；對於有合熔點之系統，則以共熔點及合熔點為分界點，採ICM模式以及依槓桿原理修正後的xi、γi來關聯其結果。 Abstract It is very common to have to separate mixtures for getting high purity products. An adductive crystallization method was employed in this study to separate closing-boiling point m-chlorophenol + p-chlorophenol mixtures in this study. Neutralizing agents including tert-butanol and aniline have been tested for separating the mixtures and their applicability were discussed. We found that aniline could be a potential neutralizing agent by the fact that it forms complexes with both m-chlorophenol and p-chlorophenol. Consequently, we further investigated the solid-liquid phase behavior for the ternary system of aniline + m-chlorophenol +p-chlorophenol . This ternary phase diagram provided us useful information for finding a feasible separation procedure and favorable operation conditions. The separating process was discussed by different initial composition of m-chlolrpheno+p-chlorophenol mixture. This diagram is built by observing the final disappearance temperature of the solid phase under accurately controlled bed temperature. For the curve fitting, the Ott & Goates fitting is chosen. As for the correlation, Wilson , NRTL and ICM models have been used to calculate the activity coefficients of the systems with or without congruent points. And the calculating shows the NRTL model gives better results .
显示于类别:	[化學工程與材料工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....