中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/3718
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78937/78937 (100%)
造访人次 : 39798746      在线人数 : 596
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/3718


    题名: 利用多塔變壓吸附法回收及濃縮煙道氣中二氧化硫之模擬;Simultanion of Recovering and Concentrating SO2 from Flue Gas by Multi-bed Pressure Swing Adsorption
    作者: 黃文建;Wen-Jian Hwang
    贡献者: 化學工程與材料工程研究所
    关键词: 模擬;二氧化硫;酸雨現象;真空變壓吸附;實驗計畫法;vacuum swing adsorption;design of experiment;acid-rain phenomena;sulfur dioxide;simulation
    日期: 2001-07-10
    上传时间: 2009-09-21 12:20:54 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 動力工廠所排放出含硫量過高之氣體是造成酸雨現象的主要原因。使用變壓吸附法濃縮及回收煙道氣中二氧化硫,使之再利用,為解決問題方法之一。近來這方面的研究已成為處理這類工廠廢氣之首要。 本研究主要利用模擬方式,採用三塔六步驟真空變壓吸附程序,處理進料為0.5﹪SO2,17﹪CO2,其餘為N2之煙道氣,吸附劑採用XAD-16(NO-treated)。模擬時所用的氣體分離機構為平衡模式,假設吸附塔內的同一截面積上固、氣兩相瞬間達成平衡,且為非恆溫之變壓吸附模式,因吸附劑顆粒大,故可忽略吸附塔內壓力降。 此一新程序可將濃度為0.5﹪SO2濃縮至12.54%,回收率達100%;本研究並探討各操作參數(諸如:各個步驟操作時間、進料壓力與沖洗比等等)對程序效能的影響,且利用直交表之實驗計畫法對此製程做模擬結果分析,可由結果得到準確的預測模式,其與模擬結果相比較,準確度約98%。 The major cause for acid-rain phenomena is the emission of SO2 from power plants that burn fossil flues. It is all-important that the recovery and concentration of SO2 from flue gas in solving SO2 problem by pressure swing adsorption. The study is on a three-bed six-step vacuum swing adsorption process using XAD-16 with NO-treated. It was performed simulation for bulk separation of SO2/CO2/N2 (0.5/17/82.5 vol %) system. This study used the equilibrium model and the pressure drop can be neglected. We assumed instantaneous equilibrium between the solid and gas phase with non-isothermal operation. The 0.5%SO2 in the feed could be concentrated to 12.54% in the product with a recovery of 100% by this study. The effects of three operating variables such as adsorption pressure, P/F ratio, steps time were investigated on the performance of this study. The design of experiment was used in analysis of simulation process and could get predictive polynomial function of result. The accuracy of function which descries performance of this study is near to 98%.
    显示于类别:[化學工程與材料工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明