MONTE-CARLO SIMULATIONS OF END-GRAFTED POLYMER-CHAINS UNDER SHEAR-FLOW

NCU Institutional Repository > 理學院 > 物理研究所 > 期刊論文 > Item 987654321/39239

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/39239

題名:	MONTE-CARLO SIMULATIONS OF END-GRAFTED POLYMER-CHAINS UNDER SHEAR-FLOW
作者:	LAI,PY
貢獻者:	物理研究所
關鍵詞:	MOLECULAR-DYNAMICS SIMULATION;FLEXIBLE POLYMERS;BRUSHES;LAYERS;SURFACES;FORCES;MODELS;MELTS
日期:	1995
上傳時間:	2010-07-08 14:09:19 (UTC+8)
出版者:	中央大學
摘要:	Polymer chains with one end grafted on a surface and exposed to a shear flow in the +x direction are modeled by a non-equilibrium Monte Carlo method using the bond-fluctuation model. In the dilute case of an isolated chain, the velocity profile is assumed to increase linearly with the distance from the surface, while for the case of polymer brushes the screening of the velocity field is calculated using a parabolic density profile for the brush whose height is determined self-consistently. Linear dimensions and orientations of isolated chains are obtained over a wide range of shear rates gamma, and the deformation of the coil structure by the shear is studied in detail. For brushes it is found that the density profile differs only little from the shear-free case, while the monomer distribution in the flow direction parallel to the wall is strongly modified. It is shown that the average scaled chain trajectory is a universal function independent of shear rate, and the results are discussed in terms of appropriate theories.
關聯:	FLOW-INDUCED STRUCTURE IN POLYMERS
顯示於類別:	[物理研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	379	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing