以chlorosilane改質D4R; unit, Si8O208- Modification of D4R unit, Si8O208-, with Chlorosilane

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 博碩士論文 > Item 987654321/4155

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/4155

题名:	以chlorosilane改質D4R;unit, Si8O208- Modification of D4R unit, Si8O208-, with Chlorosilane
作者:	愛美嘉;Widho-Retno Amijaya
贡献者:	化學工程與材料工程研究所
关键词:	Trimethylsilylated D4R unit;Dimethylsilylated D4R Unit;Octaanion;改質;的矽烷化;D4R Unit;Dimethylsilylated D4R Unit;Octaanion;D4R unit;Silanation;Modification;Trimethylsilylated D4R unit
日期:	2009-07-24
上传时间:	2009-09-21 12:32:38 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	Silsesquioxane是一分子的球型矽化物(spherosilicates)，其分子式為[RSiO2.5]n，R為有機或無機官能團，n可介於4及30之間，一般為6、8、10或12。本研究主要是將D4R silicate (Si8O20)8-¬¬以dimethylchlorosilane改質成dimethylsilylated D4R unit ((HSiMe2O)8-Si8O12)，或以trimethylchlorosilane改質成trimethylsilylated D4R unit ((SiMe3O)8-Si8O12)。Dimethylsilylated D4R unit ((HSiMe2O)8-Si8O12)可當做中間物用於合成具有化學活性的H-terminated D4R unit，而H-terminated D4R unit可連接其他官能基，如：methacrylate, epoxy group, or long chain alkyl group。 Octaanion的矽烷化(silanation)一般於兩相系統(two phase system)中進行，亦即octaanion的hydrated tetramethyl ammomium salt在水相溶液中，而silane則溶於有機相溶液中進行反應。文獻中以dimethylchlorosilane及trimethylchlorosilane改質的octaanion的產率分別為83%及93%，而octaanion中chlorosilane及Si莫耳比為4:1。根據文獻資料，此反應使用大量過量的chlorosilane，所以此反應系統仍有可改進的空間。本研究一開始先研究hexane-methanol-water tertiary system的相圖，並確認出其形成單相的區域，之後再測試含有octaanion salt的相界(phase boundary)變化。由研究中所得之含有octaanion salt的hexane-methanol-water tertiary system的單相區域，在反應中有助於octaanion salt的溶解，且有利octaanion salt與silane的反應過程。因此，經由此改質法可得到較高的產率，並減少chlorosilane的使用量。本研究結果以FTIR, DSC, TGA, and NMR等方式鑑定。 Silsesquioxane is molecular spherosilicates with the formula [RSiO2.5]n, where R is an inorganic or organic group and n can be between 4 and about 30, but typically 6, 8, 10 or 12. We focus our effort to modify D4R silicate (Si8O20)8- with dimethylchlorosilane and trimethylchlorosilane to make dimethylsilylated D4R unit ((HSiMe2O)8-Si8O12) and trimethylsilylated D4R unit ((SiMe3O)8-Si8O12) respectively. Dimethylsilylated D4R unit ((HSiMe2O)8-Si8O12) can be used as an intermediate for synthesizing spherical siloxanes owing the chemical reactivity of the a H-terminated D4R unit to connect with another function for example; methacrylate, epoxy group, or long chain alkyl group. The silanation of octaanion is typically carried out in a two phase system, where the hydrated tetramethyl ammomium salt of octaanion exists in the aqueous phase, while the silane dissolved in an organic phase. The yield for octaanion silanized with dimethylchlorosilane and trimethylchlorosilane was 83% and 93% respectively (molar ratio chlorosilane to Si in octaanion = 4 : 1). Since they used a large excess of chlorosilane, there is a large room to improve the reaction system. We will start by examining the phase diagram of hexane-methanol-water tertiary system and identify the region where a single phase is formed, and test the shift of phase boundary when octaanion salt is included. The reaction will then be carried out as much as possible in the single phase domain to facilitate the dissolution of the salt as well as its immediate reaction with silane. We believe that through such modification higher yield can be achieved with less amount of chlorosilane. The result will then be characterized with FTIR, DSC, TGA, and NMR.
显示于类别:	[化學工程與材料工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....