English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78728/78728 (100%)
造訪人次 : 33347060      線上人數 : 424
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/43546


    題名: A1050板材經非對稱輥軋之實驗研究;Experimental study of A1050 aluminum plate under asymmetrical rolling
    作者: 古紹明;Shau-Ming Gu
    貢獻者: 機械工程研究所
    關鍵詞: 曲率;非對稱輥軋;asymmetrical rolling;curvature
    日期: 2010-07-22
    上傳時間: 2010-12-08 13:44:10 (UTC+8)
    出版者: 國立中央大學
    摘要: 本文是以實驗探討板材之非對稱輥軋,在於不同輥輪周速比及縮減率下其輥軋力、輥軋扭矩和成形板材的彎曲曲率的變化情形。實驗條件為同徑不同周速比,並包含輥輪與板材間的界面摩擦狀態、初始板厚及平均輥輪直徑的不同等。 於非對稱輥軋後之板材易產生曲率彎曲現象而造成產品品質降低及設備損壞。藉由本實驗所規劃的加工參數,可得知輥軋後板材曲率彎曲行為受縮減率、異周速比及介面摩擦等的影響趨勢,探討出板材在其加工參數下之平坦區曲率值±0.0025(1/mm)的條件。藉以達到曲率控制,減少輥軋道次,以其達到加工能量需求較低之經濟性制程。 This paper discusses rolling load, rolling torque and curvature ratio with different rolling speed ratio and reduction at asymmetrical rolling. The experimental conditions include different initial flat thickness and interface between rolling and specimens by lubrication or dry friction and average diameter of the different roller. By processing parameters can find out specimens that become curvature turn up or turn down behavior with different reduction, different rolling speed, interface friction and different flat thickness after rolling process. Try to find out the flat area that curvature between 0.0025(1/mm). For the purpose of control the curvature and decrease rolling pass times that can reach lower economical production process.
    顯示於類別:[機械工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML839檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明