圓環鍛粗異向性變形之分析與研究; The investigation in the deformation of anisotropy for upsetting of ring

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/43554

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/43554

Title:	圓環鍛粗異向性變形之分析與研究;The investigation in the deformation of anisotropy for upsetting of ring
Authors:	林晏緹;Yen-Ti Lin
Contributors:	機械工程研究所
Keywords:	異向性;有限元素分析;摩擦;鍛粗;finite element analysis;anisotropy;Upsetting;friction
Date:	2010-07-22
Issue Date:	2010-12-08 13:44:36 (UTC+8)
Publisher:	國立中央大學
Abstract:	對於圓環鍛粗加工而言，除了可以探討模具與胚料間之摩擦效應外，亦可做為評估異向性材料的方法，然而對於鍛粗加工後異向性變形的行為，包含了界面的非均勻摩擦應力條件以及胚料的異向性質：前者屬於加工條件外在的〝養成〞因素，而後者卻屬於材料內在的〝本質〞因素，兩者之間具有交互的效應。本文應用Deform 3D有限元素套裝軟體分析，並利用相關實驗作驗證。來探討由非均勻摩擦及材料異向性特徵對鍛粗工件所引起的異向性變形行為效應。 For the metal forming, the upsetting of ring can be used to measure the friction effect between die and blank. Besides, it can also discuss the anisotropy of material. The behavior of anisotropic material after upsetting includes the non-uniform friction stress between two interfaces and the anisotropic property of material. The former is the external process while the latter is intrinsic from material. In this paper, Deform 3D finite element software and the related experiment are used to discuss the effect of anisotropic deformation induced by the non-uniform friction and anisotropy factor of material after upsetting process.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	625	View/Open

社群 sharing

Loading...