English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42118441      線上人數 : 881
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/43773


    題名: 以矽光學平台為基礎之4通道×10-Gbps;光學連結模組之接收端研究 4-Channel×10-Gbps Optical Interconnect Receiving Module Based on Silicon Optical Bench
    作者: 陳進達;Chin-Ta Chen
    貢獻者: 光電科學研究所
    關鍵詞: 光連結;optical interconnect
    日期: 2010-05-27
    上傳時間: 2010-12-08 14:20:05 (UTC+8)
    出版者: 國立中央大學
    摘要: 在本論文中,將提出具矽基光學平台(Silicon Optical Bench, SiOB )之微型化被動式對準光連結接收端模組,模組傳輸速度分別為4通道 × 5-Gbps與4通道 × 10-Gbps兩種,前者所對應為之光檢測器波長為1310 nm,後者所對應之光檢測器波長為850 nm,模組尺寸大小為5 × 5 mm2,此模組可應用於板對板(Board to Board)或晶片對晶片(Chip to Chip)之光學連接,矽基光連結接收端模組具有單石積體化45度微反射面、V型溝槽陣列、10-GHz高頻傳輸線、金錫焊料與高反射率金屬層,並利用混成構裝之技術將光檢測器與八芯光纖陣列以被動式對準封裝整合;45度微反射面提供光線非共平面傳輸,其表面粗糙度小於10 nm,蝕刻深度為110 um,V型溝槽陣列提供光纖擺放平台,矽基光學平台製程誤差為6 %以內;在模組光學特性上,850模組與1310模組之1-dB光學準位容忍度分別為±16與±20 um,響應度分別為0.5與0.7 A/W,鄰近通道之串音雜訊均在-25 dB以下;在模組高頻特性上,850模組之眼圖可通過OC-192眼罩(Eye Mask),而1310模組之眼圖通過OC-96眼罩,且誤碼率(Bit Error Rate, BER)皆可達到10-11等級。 In this thesis, the compact and passive-alignment optical interconnect receiving module based on silicon optical bench (SiOB) is realized. The transmission speed of receiving modules are 4-channel × 5-Gbps and 4-channel × 10-Gbps, the former is corresponded to photo-detector (PD) which wavelength is 1310 nm, the later is corresponded to PD which wavelength is 850 nm. The size of module is 5 × 5 mm2. The receiving module can apply optical interconnect of board to board or chip to chip. The silicon-based optical interconnect receiving module includes a monolithic integration of 45° micro-reflector, V-groove arrays, high-frequency transmission lines of 10 GHz, bonding pads with Au/Sn eutectic solder and metal layer with high reflection coating (HR coating),using hybrid integration of PD and fibber array of 8 channels with passive alignment process. The 45° micro-reflector provides non-coplanar transmission, which surface roughness is less than 10 nm, etching depth is 110 um, V-groove arrays provide bench of setting fiber, the tolerance accuracy of fabrication process for SiOB is less than 6 %. The optical characteristic with receiving module, 1-dB tolerance of optical level of 850-nm and 1310-nm module are ±16 and ±20 um, respectively, responsivity are 0.5 and 0.7 A/W, respectively, the cross-talk between neighboring channels can be less than -25 dB. The frequency characteristic with receiving module, The eye pattern of 850-nm module and 1310-nm module can pass OC-192 and OC-96 eye mask, respectively. The bit error rate (BER) of them can achieve 10-11 order.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML613檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明