應用於生醫工程高速/高響應發光和檢光元件的開發; The Development of High-Speed/High-Sensitive Light-Emission and Detection Devices for the Application to Bio-Medical Engineering

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 研究計畫 > Item 987654321/45973

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/45973

題名:	應用於生醫工程高速/高響應發光和檢光元件的開發;The Development of High-Speed/High-Sensitive Light-Emission and Detection Devices for the Application to Bio-Medical Engineering
作者:	許晉瑋
貢獻者:	電機工程學系
關鍵詞:	發光二極體;DNA 分析;單光子檢測器;光動力療法;生醫晶片;Light-emitting-diode;DNA analysis;Single-Photon Detector;Photodynamic therapy;Bio-Chip;光電工程
日期:	2008-07-01
上傳時間:	2010-12-28 15:54:48 (UTC+8)
出版者:	行政院國家科學委員會
摘要:	計畫中文摘要: 此計畫目的將會展示以半導體為材料且應用於DNA 分析生醫晶片光源和光動力療法光源的高速發光二極體和高響應度的檢光器。在生醫應用方面，黃綠光(~540nm)和紅光波段(~650nm)的應用不勝枚舉，例如說: DNA 分析生醫晶片光源，光動力療法光源，生物體螢光激發光源等等..。在傳統的這些生醫系統中，所使用的黃綠光光源大部份是利用半導體雷射激發的固態雷射(Diode pumped solid state laser) 所組成，並不是使用直接電激發的發光二極體或半導體雷射。由於近年來氮化鎵半導體材料的成熟，使得半導體黃綠光光源的技術也已商品化。和其他所使用的光源相比，(例如說:氣體雷射，固態雷射)半導體光源有體積小，高效率，可直接調變的優點。此子計畫中我們將利用氮化鎵的材料系統，成功製作出可操作在波長 ~500nm(黃綠光)和~400nm(UV 光)的高速和高功率發光二極體。利用這些元件可高速調變的特性，我們可以改變其工作週期 (duty cycle)和振幅來量測生物體或 DNA 的螢光動態反應，或者是降低系統的低頻(1/f)噪音。也可研究光源特殊的工作週期和功率對螢光體吸收飽合(absorption bleach)的影響，或是光動力療法的治療效果。除此之外，我們也將開發可應用在~1300nm (singlet oxygen 螢光波段) 光波段的單光子檢光器，並利用此元件超高光電轉換增益的特性檢測光動力療法效果。我們也會將這些元件應用在總計劃將要實現的晶片系統，來測試元件的實用性並展示出許多生物體實際的治療和量測結果。 The purpose of this project is to demonstrate semiconductor based high-speed light-emitting-diode (LED) and high responsivity photodetector for the applications to Bio-chip and Photodynamic therapy. In the bio-medical system, green-amber (~540nm) and red (~650nm) wavelengths regime have lots of applications, such as, light sources of Bio-chip for DNA analysis, Photodynamic therapy, and, fluorescence of Bio-tissue. In these traditional systems, the usually used green-amber light-source is diode-pumped solid-state-laser instead of current pumped semiconductor laser or LED. Recently, due to the mature of GaN based materials, the GaN based LED at green-amber wavelengths has already been commercialized. As compared to other light sources, such as, gas laser, solid state laser, semiconductor based light source has the advantage of small volume, high efficiency, and can be direct-modulation. In this sub-project, we will successfully fabricate the GaN based high-speed and high-power LEDs at the wavelengths around 500nm (green-amber) and 400nm (UV). By utilizing the properties of high-speed direct modulation of these devices, we change its duty cycle and amplitude to measure dynamic responses of Bio-tissue and DNA, reduce the low-frequency 1/f noise of system, and study the phenomenon of absorption bleach and the curing-effect of photodynamic. Besides, we will also develop the single-photon detector (SPD), which can be applied in the 1300nm wavelength regime, in order to detect the fluorescence of oxygen singlet (~1300nm) and evaluate the curing-effect of photodynamic. We will also put these devices in a real Bio-chip system, which will be realized in the main project, to test their practicability and perform lots of Bio-medical experiments. 研究期間：9608 ~ 9707
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
顯示於類別:	[電機工程學系] 研究計畫

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	338	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....