中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/46331
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 37994063      在线人数 : 727
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/46331


    题名: 平板式太陽能菲涅爾集光透鏡與二次光學元件之設計與分析;Design and Analysis of Flat Fresnel Solar Concentrator with Secondary Optical Element
    作者: 蘇加訓;Chia-Hsun Su
    贡献者: 光機電工程研究所
    关键词: 太陽能集光器;二次光學元件;菲涅爾透鏡;Solar concentrator;Fresnel lens;secondary optical element
    日期: 2011-01-25
    上传时间: 2011-06-04 14:57:44 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究透過菲涅爾透鏡初階設計公式,使用光學分析軟體ASAP建構菲涅爾透鏡之光學模型,探討其光學特性,包含輻射照度、輻射通量與容忍角度等,並使用邊緣光線設計二次光學元件與菲涅爾透鏡互相搭配,其主要目的:(1)降低太陽偏差角度所造成地能量損失;(2)使能量分佈均勻,有效提升模組效益,減少發電成本。 因此,藉由邊緣光線理論設計三種不同型式的二次光學元件搭配菲涅爾透鏡改善上述情形,利用光學模擬及參數式最佳化方式來優化二次光學元件參數設計方法,計算一組最佳的設計參數。本研究亦探究在全光譜與組裝誤差因素下對集光器之集光特性影響程度。 因溫度變化將影響透鏡幾何結構以及介質折射率,本論文亦利用有限元素分析軟體ANSYS進行菲涅爾透鏡熱變形分析,將變形後的菲涅爾透鏡資料輸出,匯入光學軟體進行分析,了解溫度對菲涅爾透鏡之集光特性影響程度。 This study presents the design of solar concentrator for Concentrated Photovoltaic (CPV) system. Firstly, the flat Fresnel lens model was constructed by Fresnel lens formula. The optical performance of the Fresnel lens under variations of prism pitches and the position of the solar cell were analyzed by ray tracing software ASAP. The simulation results showed that the acceptance angles and energy distribution of the Fresnel lens were not good enough. To improve the aforementioned drawback, different secondary optical elements (SOEs) designed by edge ray principle were proposed with the Fresnel lens. Parameter method is also applied with the optical simulations in order to find the best SOE design parameters. The two main influences of temperature variation on the Fresnel lens are change of index of refraction and thermal deformation of the Fresnel prisms. The thermal deformation of the Fresnel lens was analyzed by finite element method (FEM). The deformed lens geometry determined from FEM was imported into ray tracing simulation to investigate the effects of temperature variations on the Fresnel lens.
    显示于类别:[光機電工程研究所 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML932检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明