中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/48124
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78937/78937 (100%)
造访人次 : 39863624      在线人数 : 653
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/48124


    题名: 脈波寬度調變驅動白光LED之發光效率分析;Analysis for luminous efficiency of white LEDs with Pulse Width Modulation
    作者: 林家南;Chia-nan Lin
    贡献者: 光電科學研究所
    关键词: 發光二極體;驅動電路;脈衝寬度調變;LED;pulse width modulation;driver
    日期: 2011-07-12
    上传时间: 2012-01-05 14:34:34 (UTC+8)
    摘要: 本研究為研究一套PWM(Pulse Width Modulation)調光技術驅動白光LED之發光效率分析系統,此系統可應用於LED各種背光模組上,一般被廣泛使用之固態照明設備驅動電路為供應直流電源和交流電源驅動,為了提高 LED發光效益,我們設計可調變之PWM脈波電路驅動LED。 PWM調光技術驅動白光LED之發光效率分析系統是依照發光二極體特性設計出的驅動電路,目的為提高白光LED亮度,本系統是利用PWM脈波供應白光LED更高的正向電流驅動發光,此方法所驅動白光LED可在相同功率時,其亮度大於一般由直流電路驅動時之LED照度。系統以PWM脈波驅動電路持續供應定電流脈衝,控制脈波的頻率高於閃光臨界融合頻率,人眼將無法辨識出閃光變化,調整脈波寬度於整個週期所占的比例,LED的平均照度也隨之改變,經由量測數據得出最佳負載週期 (duty cycle)及頻率,使用此方法驅動可提高LED發光效率。 This thesis seeks to research an “analysis for luminous efficiency of white LEDs with pulse width modulation” system, the system used in all kinds of backlight module, Solid State Lighting apparatus which general used in lighting is driven by DC and AC power supply, in order to improve the luminous efficiency, we design the pulse-width modulation (PWM) circuit to drive the LED. Circuit design of “analysis for luminous efficiency of white LEDs with pulse-width modulation” system in accordance with the characteristics of light-emitting diode, with the objective to improve the brightness of white LED, this system use PWM pulse to supply of a higher forward current to drive white LED, use this method to drive a white LED in same power can get higher brightness better then driven by DC power supply. This system use PWM dimming method driving LED with constant current, control the frequency of PWM pulse below the critical flicker fusion frequency, then the flashing points of light can’t be aware by human, adjust the proportion of the entire cycle then LED average illumination also changes. Measurement data obtained by the best duty cycle and frequency, use this method to drive a white LED can get higher brightness.
    显示于类别:[光電科學研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML1254检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明