全周俯瞰監視與側邊偵測系統; Surrounding Top-view Monitor and Lateral Detection System

NCU Institutional Repository > 資訊電機學院 > 資訊工程研究所 > 博碩士論文 > Item 987654321/48414

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/48414

题名:	全周俯瞰監視與側邊偵測系統;Surrounding Top-view Monitor and Lateral Detection System
作者:	李國煒;Kuo-wei Li
贡献者:	資訊工程研究所
关键词:	影像對位;鳥瞰轉換;影像扭曲校正;影像暗角補償;相機參數校正;光流;障礙物偵測;obstacle detection;camera calibratio1n;optical flow;distortion correction;vignetting compensation;homography;image stitching;color blending
日期:	2011-07-21
上传时间:	2012-01-05 14:54:02 (UTC+8)
摘要:	道路交通事故的部分因素是因為車輛行進中沒有看到障礙物而發生的，尤其是車體結構與後照鏡角度造成的盲點區域，使得駕駛無法了解車輛週遭環境而造成人員與車輛損傷。為避免看不到車輛週遭環境而造成的交通意外，並提高停車時的安全性。我們提出一套全周俯瞰監視與偵測系統，並將之實現於DSP嵌入式系統中。整個系統共包含兩大部份：一是全周俯瞰監視用於輔助駕駛監視車輛周遭的狀況，二是側邊偵測用於協助駕駛主動偵測車輛周遭的障礙物。全周俯瞰監視與偵測系統在車輛四周架設廣角相機以拍攝車輛週遭影像，經過離線處理扭曲校正、暗角消除、俯瞰轉換後，得到四周俯瞰影像的相對關係。再使用一部相機由上方拍攝車輛四周的特徵，將俯瞰影像快速對位為一張俯視車輛週遭的全周俯瞰影像，最後將各項參數建立一張查找表，在線上處理階段根據查找表查表內插與校正影像。動態側邊偵測系統則是以側邊影像估計光流，藉由光流濾除及群聚後，擷取障礙物主動提示駕駛者。嵌入式全周俯瞰監視系統可在影像的解析度為720 × 480的情況下，於Texas Instruments? DaVinci™ DM648 900 MHz Digital Media Processor開發板上執行可達每秒10張的處理速度。而側邊障礙物偵測程序可在影像顯示大小為320 × 240的情況下，在Intel Core™2 Duo 2.83GHz及1.99GB RAM的個人電腦上可達每秒22張，障礙物偵測率可達94%。 Partial traffic accidents are resulted from drivers can’t watch the whole vehicle surroundings. To reduce the accidents caused by collision of surrounding obstacles, we mount four wide-angle cameras at the front, rear, and both lateral of the vehicle to capture consecutive images; then we present a real-time surrounding top-view monitor and a lateral obstacle detection system for parking assistance. In offline steps of surrounding top-view monitor system, we first estimate camera intrinsic and extrinsic parameters, and also calibrate the parameters of distortion model and vignetting model for distortion correction and vignetting compensation. Then we calibrate the geometric relationships of four cameras using a proposed multi-camera calibration method. Third, we calculate the feathering weights of pixels to produce a seamless surrounding top-view image. At last, we build lookup tables for recording the mapping between the captured images and the surrounding synthesized image to speed up the processing. After offline steps, our system online interpolate and calibrate the surrounding synthesized image by those lookup tables directly. In lateral obstacle detection system, we utilize the calibrated lateral images to estimate the optical flow of possible obstacles. Then we filter and group the non-ground optical flow by direction of motion vectors and color of feature pixels. Third, we determine whether the optical-flow groups are obstacle or not. Finally, the detection system will alarm if there is an obstacle to be collided by the vehicle. In our experiment, the system detection rate is about 94%.
显示于类别:	[資訊工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	698	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....