中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/49640
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42573093      線上人數 : 1707
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/49640


    題名: 植基於直流電力線控制網路架構之智慧型電池管理晶片/系統之研製-總計畫( I );Smart Battery Management Integrated Circuits/Systems on Dc Power-Line Control Bus
    作者: 魏慶隆;陳科宏;洪崇智;薛木添
    貢獻者: 電機工程學系
    關鍵詞: smart Distributed Battery Management System;Electric Vehicle;Direct Current (DC) Power line;Endurance;研究領域:電子電機工程類
    日期: 2011-05-01
    上傳時間: 2012-01-17 19:06:33 (UTC+8)
    出版者: 行政院國家科學委員會
    摘要: 目前所發展電動載具的最大考驗為續航力問題,其關鍵在於高性能的儲能系統(電池組)。當今電動載具的設計概念,係延續傳統汽油動力引擎車輛的概念發展﹐以馬達替換引擎及以一個電池組替代油箱。因此﹐電池在同一時間內僅能選擇做充電或放電,難以針對電池管理最佳化設計著墨以提高電池的效能。為了提昇電動載具的續航力﹐本計劃提出創新又可行的做法 -- 智慧型多輸入多輸出分散式電池管理系統。即在同一時間內﹐電池組內之部分電池提供動能使電動載具運行﹐部分電池利用能量採集的充電。能量採集技術如採集行駛中之能量,例如剎車時所產生之回充能量、滑行行駛狀態所產生之能量、及沙灘車之振動能量的回收等,及太陽能、再生能源、燃料能源等。電動載具係由電池以直流方式藉電力線傳輸來提供運行之能量。直流電力線亦可做為電池管理系統之通訊/控制網路的匯流排﹐整合電力線及通訊控制的迴授訊號,降低控制線與介面的數量,大幅的降低汽車的成本。本計劃著重於以直流電力線方式為電池管理系統的控制網路。完成本計劃後﹐即可整合於植基於直流電力線通訊網路之電動載具。 Long endurance is one of the major measurements of today’s development of electric vehicles (EVs). The key is the performance of its energy storage systems, or battery units. The development concept of today’s EVs came from the traditional gasoline vehicles, where the EV motor(s) replaces the engine and a big battery unit substitutes the gasoline tank. As a result, the battery set has only one choice, i.e., battery charge or discharge, at a time. It would be rather difficult to develop battery management system (BMS) to provide optimal solution and to improve the battery’s efficiency. In order to achieve long endurance of EVs, it is proposed a smart distributed multiple-inputs and multiple-outputs BMS (MIMO-BMS). The proposed MIMO-BMS allows partial battery units are discharged, while the other units are simultaneously charges from energy harvesting. Note that the energy harvesting is a process by which is derived from external sources (e.g., solar power, thermal energy, wind energy, salinity gradients, and kinetic energy), captured, and stored. Since the energy of the EVs comes from the battery set in term of direct current (DC) and provides some components of the EVs thru the power line, the power line can also be used as the communication and control buses. In other words, the power line can be integrated and utilized to deliver the power, communication, and control signals. The integration can significantly reduce the numbers of interfaces/gateways of the controlled buses, providing a cost down solution. Therefore, the emphasis of this project is placed on the development of the MIMO-BMS over the DC power-line control bus. The developed results from this project can be readily extended to the EVs based on the DC power-line control bus. 研究期間:10005 ~ 10104
    關聯: 財團法人國家實驗研究院科技政策研究與資訊中心
    顯示於類別:[電機工程學系] 研究計畫

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML414檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明