Artificial aggregate made from waste stone sludge and waste silt

NCU Institutional Repository > 工學院 > 土木工程學系 > 期刊論文 > Item 987654321/49786

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/49786

题名:	Artificial aggregate made from waste stone sludge and waste silt
作者:	Chang,FC;Lee,MY;Lo,SL;Lin,JD
贡献者:	土木工程學系
关键词:	SEWAGE-SLUDGE;PORTLAND-CEMENT;ASHES;MORTARS;CONSTRUCTION;REUSE;SSA
日期:	2010
上传时间:	2012-03-27 16:16:42 (UTC+8)
出版者:	國立中央大學
摘要:	In this research, waste stone sludge obtained from slab stone processing and waste silt from aggregate washing plants were recycled to manufacture artificial aggregate. Fine-powdered stone sludge was mixed with waste silt of larger particle size; vibratory compaction was applied for good water permeability, resulting in a smaller amount of solidifying agent being used. For the densified packing used in this study, the mix proportion of waste stone sludge to waste silt was 35:50, which produced artificial aggregate of more compact structure with water absorption rate below 0.1%. In addition, applying vibratory compaction of 33.3 Hz to the artificial aggregate and curing for 28 days doubled the compressive strength to above 29.4 MPa. Hence, recycling of waste stone sludge and waste silt for the production of artificial aggregate not only offers a feasible substitute for sand and stone, but also an ecological alternative to waste management of sludge and silt. (C) 2010 Elsevier Ltd. All rights reserved.
關聯:	JOURNAL OF ENVIRONMENTAL MANAGEMENT
显示于类别:	[土木工程學系 ] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	430	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing