Fabrication and Measurement Uncertainty Evaluation for Polystyrene Nanoparticle Standards

NCUIR > Engineering College > Department of Chemical and Materials Engineering > journal & Dissertation > Item 987654321/49858

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/49858

Title:	Fabrication and Measurement Uncertainty Evaluation for Polystyrene Nanoparticle Standards
Authors:	Chen,CJ;Lin,CM;Yu,TC;Weng,HF;Chen,H;Liu,YY
Contributors:	化學工程與材料工程學系
Keywords:	POLYMERIZATION;MICROSPHERES
Date:	2010
Issue Date:	2012-03-27 16:24:51 (UTC+8)
Publisher:	國立中央大學
Abstract:	This paper describes the fabrication, size measurement, and uncertainty evaluation for the monodisperse polystyrene latex (PSL) particles with nominal sizes of 100 nm, 300 nm, and 500 nm using the homemade electro-gravitational aerosol balance (EAB) method. In the measurement system, charged particles are classfied by the Differential Mobility Analyzer and introduced the single charged particles into the space between horizontally placed planar electrodes. The evaluation of the number of survived particles after a period of settling time can lead to determine the particle mass according to the balance between the electrostatic and gravitational forces exerted on the charged particles. And the particle size is calculated with a known density. The main contributed error sources of measurement uncertainty by EAB are survival rate curve fitting and producibility. The measurement results of homemade PSL particles are 109.0 nm +/- 1.2 nm, 284.4 nm +/- 0.92 nm and 529.4 nm +/- 1.3 nm, respectively.
Relation:	JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS
Appears in Collections:	[Department of Chemical and Materials Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	486	View/Open

社群 sharing