Analysis of signals for monitoring of nonlinear and non-stationary machining processes

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50044

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50044

题名:	Analysis of signals for monitoring of nonlinear and non-stationary machining processes
作者:	Kalvoda,T;Hwang,YR
贡献者:	機械工程學系
关键词:	FORCE
日期:	2010
上传时间:	2012-03-27 17:02:02 (UTC+8)
出版者:	國立中央大學
摘要:	An investigation of cutting process monitoring based on dynamic force and acceleration signals in the frequency and time-frequency domains is presented in this paper. The performance of a new data analysis technique, the Hilbert-Huang Transform (HHT), is used to analyze this process in frequency and time-frequency domain. This technique is also compared with the traditional Fourier transform method power spectra in the frequency domain approach. A comparison is made of the analysis of two commonly used signals: acceleration and dynamic force. The shift of the main frequency peak into lower frequencies and higher frequency fluctuations is considered as a cutter tool wear indicator. The appearance of new frequency indicates a cutter tool fault. The performance of dynamic cutting force signal using both HHT and Fourier transform shows better results within this study. The HHT (which deals with nonlinear and non-stationary signals) has been shown to be a robust tool for estimating cutter tool wear/fault. (C) 2010 Elsevier B.V. All rights reserved.
關聯:	SENSORS AND ACTUATORS A-PHYSICAL
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	325	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing