Effect of Spinning Deformation Processing on the Wear and Corrosion Properties of Al-7Si-0.3Mg Alloys

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50062

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50062

題名:	Effect of Spinning Deformation Processing on the Wear and Corrosion Properties of Al-7Si-0.3Mg Alloys
作者:	Cheng,YC;Lin,CK;Tan,AH;Lin,JC;Lee,SL
貢獻者:	機械工程學系
日期:	2010
上傳時間:	2012-03-27 17:02:35 (UTC+8)
出版者:	國立中央大學
摘要:	This study investigates the wear and corrosion properties of Al-7Si-0.3Mg (A356) alloys fabricated by the spinning deformation processing (SDP). Optical microscopy (OM) and scanning electrical microscopy (SEM) analysis indicate that the SDP virtually eliminates casting defects by elongating the microstructure. The microstructure is improved during SDP by the break-up and dispersion of the eutectic silicon phase throughout the Al-matrix. In a sliding wear environment, the enhanced microstructure diminishes crack nucleation, thus improving the longevity of alloys. In addition, the modified corrosion susceptibility during SDP protects the inter-dendritic region from the corrosion. As wear-corrosion test, the improvement of wear resistance caused by SDP diminishes synergistic attack of wear and corrosion, decreasing the wear-corrosion rate of A356 alloys.
關聯:	MATERIALS AND MANUFACTURING PROCESSES
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	417	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing