Analysis and Modeling of a Pneumatic Servo System Based on Backstepping Design

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50194

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50194

題名:	Analysis and Modeling of a Pneumatic Servo System Based on Backstepping Design
作者:	Lu,CH;Hwang,YR;Shen,YT;Wang,TY
貢獻者:	機械工程學系
關鍵詞:	AIR MOTOR
日期:	2011
上傳時間:	2012-03-27 17:06:07 (UTC+8)
出版者:	國立中央大學
摘要:	Air motors have often been utilized in industrial servo systems in the automation industry due to their advantages such as small volume, low cost, light weight, convenience of operation, and no overheating problems. Recently, the development of control technology has improved, making the requirements for control precision higher than ever before. Accurate control performance in pneumatic systems is facilitated by the implementation of nonlinear control techniques. The purpose of this study is to analyze the behavior of a biaxial pneumatic table motion system with a vane-type air motor, and to design a backstepping sliding mode controller for this system. A proportional integral derivative controller compared with this new backstepping design. The tracking circle error and tracking error of the two axes are noted. The experimental results show that accurate tracking circle trajectory performance can be achieved with the proposed controller. [DOI: 10.1115/1.4004601]
關聯:	JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	425	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing