Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50211

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50211

题名:	Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process
作者:	Kuo,HC;Jeng,MC
贡献者:	機械工程學系
关键词:	TRIBOLOGICAL BEHAVIOR;FRICTION;THERMOPLASTICS;EXTRUSION;MECHANISM;BLENDS;STEEL
日期:	2011
上传时间:	2012-03-27 17:06:34 (UTC+8)
出版者:	國立中央大學
摘要:	The objective of this study was to investigate the effects of various sliding wear test conditions on the tribological properties of UHMWPE. The results indicated that the wear resistance of UHMWPE in the sliding direction perpendicular to the melt flow direction was stronger than that in the sliding direction parallel with the melt flow direction. It was found that the X-Z plane obtains more serious incomplete molecular bondings and cracks than the Y-Z plane. The main wear mechanisms were plastic deformations and wrinkled formations. The UHMWPE hardness increases or decreases as the applied load and sliding frequency increases or decreases.
關聯:	POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	378	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing