Machining Characteristics of Polycrystalline Silicon by Wire Electrical Discharge Machining

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50247

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50247

题名:	Machining Characteristics of Polycrystalline Silicon by Wire Electrical Discharge Machining
作者:	Yu,PH;Lee,HK;Lin,YX;Qin,SJ;Yan,BH;Huang,FY
贡献者:	機械工程學系
关键词:	SINGLE-CRYSTAL SILICON;EDM;COMPOSITES;PARAMETERS;EFFICIENCY;QUALITY;CARBIDE;SURFACE;STEEL
日期:	2011
上传时间:	2012-03-27 17:07:34 (UTC+8)
出版者:	國立中央大學
摘要:	This study examines the use of wire electrical discharge machining (WEDM) in machining polycrystalline silicon with resistivity of 2-3 Omega cm. The effects of different WEDM parameters on cutting speed, machining groove width, and surface roughness are explored. Experimental results indicate that open voltage is the critical parameter in breaking the insulation of polycrystalline silicon, and that pulse-on time has the greatest influence on cutting speed. Other machining factors, such as flushing rate, have no significant effect on cutting speed but do nonetheless improve machining groove width and surface roughness. In addition, strengthening wire tension reduces vibration of the wire electrode, which also helps improve machining groove width. The experimental results show that WEDM can be practically applied to machining polycrystalline silicon. Hence, applications of WEDM to manufacturing of solar cell can lead to significant enhancement in production efficiency.
關聯:	MATERIALS AND MANUFACTURING PROCESSES
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	496	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing