Numerical simulation of heat and fluid flows for sapphire single crystal growth by the Kyropoulos method

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50252

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50252

题名:	Numerical simulation of heat and fluid flows for sapphire single crystal growth by the Kyropoulos method
作者:	Chen,CH;Chen,JC;Lu,CW;Liu,CM
贡献者:	機械工程學系
关键词:	EXCHANGER-METHOD;TRANSPORT;MELT
日期:	2011
上传时间:	2012-03-27 17:07:42 (UTC+8)
出版者:	國立中央大學
摘要:	Numerical computation has been performed to investigate temperature and velocity distributions for different stages of the Kyropoulos sapphire single crystal-growth process. The finite-element method is employed to solve the governing equations with proper boundary conditions. In the power history considered here, a vortex appears in the melt during growth, and its strength decreases as the input power is reduced. Isotherms in the melt are distorted by flow motion. The crystal-melt interface is always convex towards the melt and in early stages the convexity increases as the input power decreases. When the crystal-melt interface is close to the bottom of the crucible, this interface is flat near the apex because of reduction in growth rate near the upper region caused by input heat from the bottom of the crucible. Therefore, convexity of the crystal-melt interface decreases the input power decreases. The crystal shape predicted by the present simulation is similar to that of crystals grown in the industry. (C) 2010 Elsevier B.V. All rights reserved.
關聯:	JOURNAL OF CRYSTAL GROWTH
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	429	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing