The reactor design for photoelectrochemical hydrogen production

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50271

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50271

题名:	The reactor design for photoelectrochemical hydrogen production
作者:	Tseng,CJ;Tseng,CL
贡献者:	機械工程學系
关键词:	PHOTOTHERMAL ELECTROCHEMICAL ANALYSIS;WATER;GENERATION;EFFICIENCY;FUEL;ENERGY;SYSTEM
日期:	2011
上传时间:	2012-03-27 17:08:13 (UTC+8)
出版者:	國立中央大學
摘要:	The heat transfer and flow characteristics of a photoelectrochemical (PEC) hydrogen generation reactor are investigated numerically. Four different reactor designs are considered in this study. The solar irradiation is separated into short and long wavelength parts depending on the energy band gap of the photoelectxode used. While short wavelength part is used to generate electron and hole pairs, the long wavelength part is used to heat the system. Because the energy required for splitting water decreases as temperature is increased, heating the reactor by using the long wave energy increases the system efficiency. Thus, how the long wavelength energy is absorbed by the reactor is very important. The results show that more long wavelength energy kept inside the reactor can increase the solar-to-hydrogen efficiency, eta(SH). For Fe(2)O(3) photoelectrode, careful reactor design can increase eta(SH) by 11.0%. For design D under 4000 W/m(2) irradiation and a quantum efficiency of 30%, eta(SH) is found to be 14.1% and the hydrogen volume production rate is 166 L/m(2) h for Fe(2)O(3). Effects of several parameters on the PEC hydrogen reactor are also discussed. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	402	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....