Polarization-insensitive subwavelength sharp bends in asymmetric metal/multi-insulator configuration

NCU Institutional Repository > 理學院 > 光電科學與工程學系 > 期刊論文 > Item 987654321/51054

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/51054

題名:	Polarization-insensitive subwavelength sharp bends in asymmetric metal/multi-insulator configuration
作者:	Chang,YJ;Liu,YC
貢獻者:	光電科學與工程學系
關鍵詞:	SILICON-ON-INSULATOR;WAVE-GUIDE BENDS;CORNER-MIRRORS;OPTICS
日期:	2011
上傳時間:	2012-03-27 18:16:52 (UTC+8)
出版者:	國立中央大學
摘要:	A new silicon-based sharp waveguide bend in asymmetric metal/multi-insulator configuration is described. TE and TM modes are calculated rigorously electromagnetically from which the general design rules are derived. Numerical simulations show that the respective insertion losses of < 0.085 dB and < 0.229 dB for TE and TM modes can be achieved by introducing a low-index layer between the metal and high-index core. The bending length is determined by the TE mode and has much smaller impacts on the TM that exhibits no resonance-like behavior as does the TE. The combined TE modal and radiation power in the air region is shown to couple back to the Si core through an asymmetric output taper, yielding a high transmission efficiency. Structure-enabled successive photonic-plamsonic mode conversions are shown to increase the TM mode confinement in the high-index core while the plasmonic mode carries up to 42.6% of the input power along the bending section. (C) 2011 Optical Society of America
關聯:	OPTICS EXPRESS
顯示於類別:	[光電科學與工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	500	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing