Band selection filter for ultra-wideband/Ku dual-band low-noise amplifier in the CMOS process

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/52037

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/52037

题名:	Band selection filter for ultra-wideband/Ku dual-band low-noise amplifier in the CMOS process
作者:	Chiou,HK;Lin,JY;Tai,CF
贡献者:	電機工程學系
关键词:	LNA;RECEIVERS;DESIGN
日期:	2011
上传时间:	2012-03-28 10:13:52 (UTC+8)
出版者:	國立中央大學
摘要:	This work proposes a band selection filter (BSF) for a fully integrated ultra-wideband (UWB) 3.1-10.6 GHz/Ku band 11.8-14.8 GHz dual-band low-noise amplifier (LNA) in 0.13 mu m CMOS technology. Detailed analysis and design criteria of the proposed BSF and wideband LNA are given. The operating frequency band can be selected by the transistor M(n) between its off and on states. The BSF is designed, analysed and fabricated in a 0.18 mu m CMOS process to verify its feasibility. The BSF has a minimum insertion loss of 0.7/2.9 dB for a low-pass and high-pass filter, and an input-referred IP3 (IIP3) exceeding 20/33 dBm in the off and on states. The measured performance of the switched LNA in UWB band achieves a maximum power gain of 12.3 dB and a 1-dB bandwidth of 2-10.5 GHz, a minimum noise figure (NF) of 4.9 dB and an IIP3 of -16.7 dBm. In Ku band, the measured performance are a maximum power gain of 10.7 dB with a 1-dB bandwidth of 11.5-13.5 GHz, a minimum NF of 5.7 dB and an IIP3 of -16.1 dBm. The dual-band LNA consumes a DC dissipation power of 14.3 mW from a 1.1 V supply voltage. The chip area, excluding pads, is only 0.35 mm(2).
關聯:	IET MICROWAVES ANTENNAS & PROPAGATION
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	462	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....