SOFC電池堆結構耐久性研究與壽命評估;Life Assessment and Structural Durability for SOFC Stacks

NCU Institutional Repository > 工學院 > 機械工程學系 > 研究計畫 > Item 987654321/55786

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/55786

題名:	SOFC電池堆結構耐久性研究與壽命評估;Life Assessment and Structural Durability for SOFC Stacks
作者:	林志光
貢獻者:	中央大學機械工程學系
關鍵詞:	機械工程類;能源工程;固態氧化物燃料電池;熱應力;耐久機械強度;Solid Oxide Fuel Cell;Thermal Stress;Mechanical Durability
日期:	2008-09-01
上傳時間:	2012-10-01 11:30:48 (UTC+8)
出版者:	行政院原子能委員會
摘要:	固態氧化物燃料電池（SOFC）屬於高發電效率的高溫型燃料電池（工作溫度範圍在650-1000oC），其中平板式SOFC具有較簡單的結構設計與製作成本、較高能源效率、較低工作溫度（800oC以下）等優點，成為目前全世界對SOFC研發的重點。為配合核研所開發平板式固態氧化物燃料電池（SOFC）發電系統，本計畫將進行SOFC電池堆機械強度劣化機制之分析與耐久壽命評估，並進一步發展電池堆結構耐久性能模擬測試技術。SOFC系統在運轉使用時，隨著工作溫度的改變，由於不同組件間具有不同的熱膨脹係數值，加上工作環境溫度分佈不均勻，因而會產生不可忽視的熱應力。對陶瓷材料所製成的三合一電池片（PEN）而言，熱應力可以促進陶瓷材料既存孔隙或缺陷成長為較大的裂縫造成組件的洩漏或破損，降低電池的效率，因此對SOFC電池堆進行熱應力分析與耐久機械強度評估，將是設計SOFC系統不可或缺的步驟。依此，本計畫將根據有限元素數值模擬分析所獲致之SOFC電池堆熱應力分佈數據，對電池片及單元電池層進行在工作溫度下受該等熱應力作用之耐久機械強度試驗，並分析其機械強度劣化機制，進而建立平板式SOFC電池堆設計與耐久壽命評估最佳化模式，作為核研所設計平板式電池堆組件結構尺寸與材料選擇的參考依據。 ; The solid oxide fuel cell (SOFC) operates at a high-temperature range of 650 to 1000oC in a direct conversion process such that they have the highest efficiencies of all fuel cells. As planar SOFC systems have several advantages such as compact size, higher energy efficiency and lower operating temperature (below 800oC), most of the current research on SOFC is being focused on the planar type. The typical materials used for anode, electrolyte, and cathode (often called a positive electrode-electrolyte-negative electrode, PEN) in SOFCs are all ceramic materials and brittle in mechanical characteristics. The high-temperature operation, however, gives rise to significant thermal stresses caused from mismatch of coefficients of thermal expansion among various components and temperature gradients in the SOFC system. When a ceramic component is held under such a prolonged thermal load (stress), pre-existent pores or defects which are subcritical, i.e. less than the critical defect size for immediate failure, can grow to failure and degrade the performance of a SOFC system during service. The purpose of this research proposal is to characterize the thermal stress distribution in a planar SOFC system which is being developed at the Institute of Nuclear Energy Research (INER). It is also intended to establish a mechanical testing technique and determine the high-temperature mechanical properties of the ceramic components used in this developing planar SOFC system. A 3-D finite element model for a multiple-cell SOFC stack will be constructed to solve the thermal stress distribution in different stages including start-up and steady operation. In addition, mechanical testing of the high-temperature strength and durability of the PEN will be conducted in conjunction with the numerical analysis for assessment of the risks related to operation of the SOFC stack when subjected to the thermal stresses. Based on the numerical and experimental results, an optimal design and life assessment model for planar SOFC systems will be developed and applied to the planar SOFC system being developed at INER. ; 研究期間 9701 ~ 9712
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
顯示於類別:	[機械工程學系] 研究計畫

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	260	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....