以反應性射頻磁控濺鍍搭配HMDSO電漿聚合鍍製氧化矽摻碳薄膜阻障層之研究;Investigation of SiOx:C barrier films deposited by RF reactive magnetron sputtering coupled with HMDSO/O2 plasma polymerization

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/57764

Title:	以反應性射頻磁控濺鍍搭配HMDSO電漿聚合鍍製氧化矽摻碳薄膜阻障層之研究;Investigation of SiOx:C barrier films deposited by RF reactive magnetron sputtering coupled with HMDSO/O2 plasma polymerization
Authors:	魏敬倫;Wei,Chin-Lun
Contributors:	光電科學與工程學系
Keywords:	射頻磁控濺鍍;電漿聚合;HMDSO;薄膜阻障層;氧化矽;軟性電子;Barrier films;Flexible electronics;HMDSO;Plasma Polymerization;Reactive magnetron sputtering;Silicon oxide
Date:	2012-10-04
Issue Date:	2012-11-12 14:29:55 (UTC+8)
Publisher:	國立中央大學
Abstract:	軟性電子產業於近期內崛起，其輕薄、可撓可攜、大面積之優點使其被廣泛應用於顯示器、照明、能源及生醫等領域中，並在未來十年內大幅改變人類生活型態。然而，當有機軟性元件被製作於塑膠基板上，許多材料及製程上的挑戰臨到。其中，有機半導體對水氣、氧氣十分敏感，其電性受氣體影響而迅速衰退，此乃可撓式有機發光二極體難以順利發展的原因之一。為提升有機元件壽命，製備極低水氣穿透率(WVTR)(<10^-6 g/m^2/day)及柔軟性佳之薄膜阻障層為首要之務。本研究使用射頻磁控濺鍍搭配有機單體HMDSO於PET基板上沉積氧化矽摻碳薄膜阻障層。磁控濺鍍槍、矽靶材及通入之氬氣、氧氣在210^-2 torr腔體壓力下以高密度電漿進行濺鍍，同時打斷HMDSO單體鍵結，與其共同反應聚合沉積高緻密性薄膜。一般HMDSO電漿聚合製程中，薄膜內籠狀矽氧結構多於線狀矽氧結構；而本鍍膜系統中，矽靶逸出之矽原子少數與氧結合，多數與碳結合，形成較多線狀結構，因而沉積出孔洞性少且化學性質接近聚合物之薄膜。實驗以100W射頻能量、10sccm氧氣、30sccm氬氣及4sccm HMDSO成功鍍製一緻密性高、孔洞性低、光穿透率高於90%、膜厚50nm的薄膜阻障層，其水氣穿透率可達7.610^-2 g/m^2/day，約為目前以HMDSO製備氧化矽單層膜之WVTR最佳值0.3 g/m^2/day 的1/4。相信未來可用此有機無機材料混合方式沉積氧化矽多層膜，並符合有機元件阻水及可撓需求，以應用於OLED封裝產業。The recent rise of flexible electronics industry aiming to deliver lightweight, flexible, portable and large-area products has been extensively applied in the fields of display, lighting and biomedical engineering and will be the next-generation lifestyle-changing electronic devices. However, many material and process-related challenges appear when flexible organic components are fabricated on polymer substrate. Among the challenges, moisture permeation could degrade and reduce the performance and durability of organic flexible organic light-emitting diode (OLED), making it difficult to be developed. In order to achieve OELD’s lifetime of thousands of hours, water vapor transmittance rate (WVTR) must be below <10^-6 g/m^2/day. In this study, magnetron sputtering and hexamethyldisiloxane (HMDSO) were used to deposit SiO2:C barrier film on PET substrate. In high-density plasma produced by magnetron sputtering gun, oxygen, silicon atoms and fragmented HMDSO were mixed together under 210^-3 torr to deposit dense films. During PECVD process, there were more cage silicon-oxide structures than linear silicon-oxide structures. By contraries, in our system, most escaping silicon atoms from target connected with carbon atoms instead of oxygen atoms, resulting in a polymer-like film with large amount of linear structure. 100 W RF power, 10sccm O2, 30sccm Ar and 4 sccm HMDSO were applied to deposit a 50-nm-thick film with low porosity and high transmittance above 90%. WVTR of the film reached the value of 7.610^-2 g/m^2/day, which is 4 times lower than the best WVTR value, 0.3 g/m^2/day, of films deposited by PECVD-HMDSO system. It is believed that by combining organic and inorganic process, multilayer could meet OLED barrier requirement and will be used in OLED encapsulation industry in future.
Appears in Collections:	[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	1187	View/Open

社群 sharing

Loading...